SA-81Machar Jaali (Mosquito Mesh)
SS / Aluminium insect screen mesh available in 5 standard width rolls.
Sizes: 2ft, 2.5ft, 3.5ft, 3.75ft, 5ft
Machar jaali & window mesh — Raipur
Machar jaali is the insect screen fitted into a window frame, and it comes in four materials: stainless steel, aluminium, powder-coated black steel and plastic. Salasar stocks all four in Raipur in five standard roll widths — 2 ft, 2.5 ft, 3.5 ft, 3.75 ft and 5 ft — as full rolls or short cuts.
Also spelled machhar jali or simply jali. The two decisions are material and width, and both are easy to get wrong. Measure the clear opening of the mesh channel rather than the glass, then take the next standard width up so there is material to grip when the beading is rolled in. On material, the honest answer depends on where the window is: plastic is genuinely fine in shade and will not last two seasons in direct sun.
Stainless steel (SA-81) lasts longest — it does not rust, sunlight does not embrittle it, and it holds tension for years. Powder-coated black (SA-83) is the least visible from inside a lit room, which matters on a window you actually look through, and the coating protects the steel. Plastic (SA-84) is HDPE: cheapest, and it goes brittle under direct sun over a few seasons.
See the full category →
SA-81SS / Aluminium insect screen mesh available in 5 standard width rolls.
Sizes: 2ft, 2.5ft, 3.5ft, 3.75ft, 5ft
SA-83Matte black anti-corrosion mesh for modern window security screens.
SA-84High-density HDPE plastic mesh for economical window insect screening.
Where a window exists only for ventilation — a bathroom, a kitchen service window, a stairwell — fixed aluminium louvre blades do the job without a moving sash or mesh to maintain. They stay open, so there is nothing to forget to close.
See the full category →
SA-82Ventilation louver blades for bathroom & kitchen window shutters.
Mesh is not glued or stapled. It is pressed into a channel in the frame with a rubber beading using a roller tool, and the beading is what holds it. Corner cleats are used when a fabricator is making the mesh frame itself rather than fitting into an existing one.
See the full category →
SA-26Rubberized buffer window stopper preventing frame impact damage.
SA-49EPDM rubber glazing gasket for waterproof window sealing.
SA-85Internal aluminium corner cleat joint for 90° window frame crimping.
Measure the clear opening of the window frame at its widest point and take the next standard width up. We stock 2 ft, 2.5 ft, 3.5 ft, 3.75 ft and 5 ft. The spare material is what you grip when tensioning the mesh into the channel — trimming an oversize piece is easy, stretching an undersize one is impossible. Measure each window separately; windows in the same wall are often a few millimetres apart.
Stainless steel. It does not rust, ultraviolet light does not embrittle it, and it keeps its tension for years. It is the right choice for any window that is awkward to reach or exposed to sun and rain. Powder-coated black steel is the middle option and is the least visible from inside. Plastic is the cheapest and the shortest-lived in direct sunlight.
Yes. For one or two windows a short cut is the sensible purchase. A full roll works out meaningfully cheaper per foot if you are doing a whole house, and leaves material for repairs later.
A small tear away from the edges can be patched and it will hold. Anything larger, or mesh that has gone slack across the whole panel, is better replaced — the mesh itself is inexpensive relative to the time spent fitting it, and a second repair on a tired panel rarely lasts.
Connect directly with Abhishek at Salasar Aluminium & Hardware for wholesale catalog pricing, bulk box quotes, and direct manufacturing stock availability in Raipur.